Deccan Pumps Borewell Submersible Pumpsets for 150 mm Borewells (6”)
Deccan (V6) borewell pumpsets are of wet type water lubricated. The motor is made to Indian/NEMA standards. The pump is made up of cast iron casings with stainless steel impellers. Adequate supports are provided in between for shaft support. The motor case, fasteners, shafts are all made of stainless steel. No threaded joints are used. Radial flow and mixed flow constructions are available
Description :
PUMP
- Head upto 500 metre
- Delivery upto 1300 lpm
- Maximum diameter 142 mm
- Maximum sand content 50 g/m3
- Delivery port
Radial flow: 40 mm (1 ½”), 50 mm (2”), 65 mm (2 ½”)
Mixed flow: 65 mm (2 ½”), 75 mm (3”), 100 mm (4”) - HP / Stage
Radial flow: 0.3, 0.4, 0.5, 0.6, 0.8, 1.0
Mixed flow: 1.0, 1.12, 1.25, 1.50, 2.0, 3.0 - Radial flow: Tie rods (Pattis) type
- Mixed flow: stud (handi) type
MOTOR
- Wet type water lubricated and cooled with PVC/Poly wrap winding
- Maximum starts per hour 20
- Mounting standard IS/NEMA
- Acceptable voltage variation: +6% to -15% (category ‘B’)
- Maximum temperature of water: 30ᵒ C, derate motors for high temp
- S1 Type Duty
- Three phase version
380 – 415 V, 50 Hz, 2 Pole, 2880 rpm from 1.5 kW (2 HP) – 37 kW (50 HP) - DOL upto 7.5 kW (10 HP), SD from 3.7 kW (5 HP) – 37 kW (50 HP)
- Single phase version
*220 – 240 V, 50 Hz, 2 pole, 2880 rpm from 1.5 kW (2.0 HP) – 7.5 kW (10 HP) - Two phase version
*460 V, 50 Hz, 2 pole, 2880 rpm from 3.7 kW (5 HP) – 15 kW (20 HP)
*Above3.7kW(5 HP) Separate distribution transformers