Pulp and Paper Industry Pumps
Pumpscart pumps’ ability to handle abrasive substances, and efficiently pump the tough ones make them particularly useful for applications in the Pulp and Paper Industry Pumps in India.
Pumpscart is the prominent supplier and exporter of Pulp and Paper Industry Pumps in India. Pulp and Paper Industry Pumps supplier In India Pumping needs for paper and pulp can be quite challenging since the raw material is extremely tough to transfer. Additionally, a number of chemicals are used to obtain the required quality of the final product and also the process is significantly temperature sensitive. Keeping all these requirements, An pumps are designed to be sturdy, durable and highly efficient. Rotor and stator material of our pumps can be customized as per customer’s process specifications. The pulp and paper industry comprises companies that use wood as raw material and produce pulp, paper, paperboard and other cellulose-based products.
Types of Pulp and Paper Pumps Pumps
Centrifugal Process Pumps
Centrifugal process pump is the most used pump in pulp and paper industry. Our specially designed centrifugal process pumps include end-suction and back-pullout type centrifugal pump. Various kind of process has been done while manufacturing the paper. Using the wood pulp paper is manufactured in paper industries.
Slurry Pumps
Our slurry pump is the most efficient pump that increases the pressure of solid and liquid material by generating the centrifugal force and converts electrical energy into slurry potential and kinetic energy. In paper and pulp industry slurry pump is widely used to transport corrosive and high concentration slurry.
FAQ
What is pulp pump?
Pulp pumps are used for transporting mixtures of liquid and solid components (e. g. fibrous materials in the pulp and paper industry). These include open impellers, which can be combined with a side channel impeller if the pulp is hard to pump, and free-flow impellers (also see Torque flow pump).
What are pumps for pulp and paper used for?
Pulp pumps are used for transporting mixtures of liquid and solid components (e. g. fibrous materials in the pulp and paper industry).
Pulp stock behaves differently from water. As consistency (fibre content) increases, ordinary centrifugal pumps lose performance and can become air-bound. Typical practice:
- Stock pumps with open or semi-open impellers handle low to medium consistency stock
- Medium-consistency pumps with degassing are used for thicker stock
- Slurry pumps handle lime mud, coating and filler slurries
- Chemical pumps handle bleaching agents and caustic
Wetted parts are often stainless steel or duplex grades because process liquids are corrosive. Share your stock consistency, flow and head with Pumpscart for help selecting a pump.
Pulp and paper pumps specification
- Technical Specification:
- Type: End-Suction and Back-Pullout Type Centrifugal Pump.
- Capacity: up to 1100 m3/hr.
- Head: up to 150 Meter.
- Pressure: up to 15 kg/cm2.
- Size : 25mm to 300mm.
- Speed: up to 3500 rpm.
- Temperature: up to 350° C.
What are the applications of pulp and paper pumps?
Transporting Wood Chips for Pulp Making Pulp Digester Tanks Pulp Bleaching Process Pulp Slurry Transfer
Each of these stages places different demands on the pump. Chip transport and digester feed involve hot liquor with solids, so robust centrifugal pumps with wear-resistant parts are used, and digester circulation runs at high temperature and pressure. Bleaching uses corrosive chemicals such as chlorine dioxide, hydrogen peroxide and caustic, which call for higher alloys or lined materials. Slurry transfer needs open impellers that pass fibre without clogging. Other mill services include white water, boiler feed, effluent and chemical dosing. Send details of the stage, liquid and duty point to Pumpscart for a recommendation.
Need help choosing the right pump?
Send your duty point — flow, head, liquid and temperature — and our engineers will recommend a pump and send a quote.